Fats, Roots, Oils, and Grease (Frog) in Centralized and Decentralized Systems

افزودن به بوکمارک اشتراک گذاری 0 دیدگاه کاربران 5 (0)

مشارکت: عنوان و توضیح کوتاه هر کتاب را ترجمه کنید این ترجمه بعد از تایید با نام شما در سایت نمایش داده خواهد شد.

ترجمه این کتاب مشاهده همه کتاب های ترجمه نشده

از خودتان درباره کتاب توضیح کوتاهی بنویسید

Comprises Fats, Roots, Oils, and Grease (FROG) in Centralized and Decentralized Systems (03-CTS-16T) on CD-ROM containing Excel tool + companion reports and Assessment of Grease Interceptor Performance (03-CTS-16TA) and FOG Interceptor Design and Operation (FOGIDO) Guidance Manual (03-CTS-16TB) in PDF format.
Fat, oil, and grease (FOG) is generated everyday by food preparation and cleaning activities conducted at commercial establishments and, on a smaller scale, by residential sewer usage. Another common problem, known to all plumbing and utility maintenance personnel, is the process of increasingly dense mats of root hair. FOG or root accumulations in the sanitary sewer collection system result in reduced capacity that may lead to sanitary sewer overflows (SSO) if not periodically cleaned. As the mat or accumulation commence, the effect of slowed wastewater flow exacerbates the rate of accumulation and deposit of FOG materials onto the pipe walls, thereby reducing capacity. The primary means of controlling FOG blockages is to capture and retain FOG materials through passive grease interception devices. Limited scientific studies have been done evaluating these devices, and many claims of enhanced performance made in marketing strategies by manufacturers of grease and oil interception devices need to be verified by objective and unbiased research protocols.
This report performed an evaluation of field grease interceptors through their separation and cleaning cycles, performed controlled laboratory scale grease interceptor tests and numerical simulations to assess their removal efficiency at different residence times and under different geometric configurations. Currently, no study has performed any analysis of the chemical and physical makeup of FOG deposits formed in the sewer collection system. This type of information would be a crucial first step in understanding what compounds should be limited in the effluent discharge of grease interceptors. This report identifies the major chemical constituents and physical characteristics of FOG deposits retrieved from sewer collection systems across the different EPA zones. Measurements included total oil and grease, fatty acid profile, metals and mineral content, shear and compressive strength. In addition, surface chemistry analyses have been performed on sewer pipes and tree roots to determine if there is a preferential selection of FOG deposits on specific surface types.
Finally, the invasion of sewer pipes by tree roots is a major cost to both the corporations managing urban infrastructure and to private landowners. When a root branch encounters improved sewer pipe conditions (high moisture and nutrients), the root system tends to envelope that section of sewer pipe, particularly when the surrounding urban soils are typically poor in nutrients or low in water content such as during drought conditions. Roots grow by elongation, which allows roots to enter into small openings in sewer pipe joints and cracks. While root control strategies that involve chemical and or mechanical methods are currently being utilized by municipalities, few studies have performed control studies in sewer systems. This report compares two chemical root control methods and a mechanical control method. Root control tests were performed in a pilot-scale sewer system that included three types of trees.
Assessment of Grease Interceptor Performance (03-CTS-16TA) Fat, oil, and grease (FOG) is generated everyday by food preparation and cleaning activities conducted at commercial establishments and, on a smaller scale, by residential sewer usage. FOG accumulations in the sanitary sewer collection system result in reduced capacity that may lead to sanitary sewer overflows (SSO) if not periodically removed. The primary means of controlling FOG blockages is to capture and retain FOG materials before discharge into sewer systems through the use of passive grease interception devices. Limited scientific studies have been done to evaluate the performance of these devices. Many claims of enhanced performance made in marketing strategies by manufacturers of grease and oil interception devices need to be verified by objective and unbiased research protocols.
This report presents the evaluation of field grease interceptors through their separation and cleaning cycles. In addition, researchers performed controlled laboratory scale grease interceptor tests and numerical simulations to assess removal efficiency by grease interceptors (GI) at different residence times and under different geometric configurations. Numerical simulations included a 3-D multi-phase flow model of a grease interceptor to evaluate design changes, and operation and maintenance conditions on the removal of FOG from food service waste streams. The results from experimental tests performed on lab-scale grease interceptors were used to validate the model results. FOG Interceptor Design and Operation (FOGIDO) Guidance Manual (03-CTS-16TB) Fat, oil, and grease (FOG) is generated everyday by food preparation and cleaning activities conducted at commercial establishments and, on a smaller scale, by residential sewer usage. FOG accumulations in the sanitary sewer collection system result in reduced capacity that may lead to sanitary sewer overflows (SSO) if not periodically cleaned. As the accumulation commences, the effect of slowed wastewater flow exacerbates the rate of accumulation and deposit of FOG materials onto the pipe walls, thereby reducing capacity. The primary means of controlling FOG blockages is to capture and retain FOG materials through passive grease interception devices. Limited scientific studies have been done evaluating these devices, and many claims of enhanced performance made in marketing strategies by manufacturers of grease and oil interception devices need to be verified by objective and unbiased research protocols.
A companion report from this research entitled "Assessment of Grease Interceptor Performance" has conducted such a study. The FOGIDO report outlines the recommendation for the sizing and configuration of grease interceptors using research information from the companion report. In addition, an excel spreadsheet GI size calculator has been developed to compute flows and FOG loading to size the GI for a specific food service establishment.

لغو

گزارش تخلف

مغایرت عنوان کتاب با توضیحات و تصویر جلد
عدم رعایت حقوق نشر طبق قوانین جمهوری اسلامی ایران
محتوای مستهجن
توهین به قومیتها و محتوای نژادپرستی
توهین به اقیلیتهای مذهبی
اهانت به مقامات سیاسی و مذهبی
اشاعه ی کودک آزاری
سایر موارد

بستن

فرمت کتاب

ebook

زبان

english

تاریخ انتشار

2009

نویسنده

Joel J. Ducoste

ناشر

IWA Publishing (Intl Water Assoc)

شابک

9781843395232

20,000 تومان

خرید کتاب مطالعه نمونه درخواست ترجمه کتاب

خرید کتاب Fats, Roots, Oils, and Grease (Frog) in Centralized and Decentralized Systems

Fats, Roots, Oils, and Grease (Frog) in Centralized and Decentralized Systems

گزارش تخلف

فرمت کتاب

ebook

زبان

english

تاریخ انتشار

2009

نویسنده

ناشر

شابک

کتاب های مرتبط

Dissolved Air Flotation for Water Clarification

Sustainable Diplomacy

Energy, The Environment And Climate Change

The Climate Change Crisis

Drawdown

Feral

Climate-Challenged Society

Nature in the Balance

The Anthropocene

Reservoir Eutrophication

Methods of Environmental Impact Assessment

Why Aren't We Saving the Planet?

Resilience

Why Aren't We Saving the Planet?

Irreplaceable

What We Need to Do Now

Talking climate : from research to practice in public engagement

Dead Zone

Wilderness

9780192176653

Governance of Earth Systems

دیدگاه کاربران